Help installing USB driver for AT-D868UV on Windows 10
Yes, the issue that I cant install any new driver in my system, even very common like mass storage driver. I logged as administrator, the 'rollback driver' button is dimmed. Probably this happen because driver isn't installed. I also tried rollback drive for USB Controllers. Download and install USB driver (CP210xVCP) to your PC. Uniden DFR6 Drivers — When you have downloaded the zip file, open up the folder & select one of the two Applications. CP210xVCPInstallerx64 for 64-bit Operating Systems. Or CP210xVCPInstallerx86 for 32-bit Operating Systems. Download and install Firmware Update Manager. Contact Uniden Support Via email at custsupport@uniden.com or visit our support center. Cordless / Corded Phone Support Support for these devices is available only via the support website. No phone support is available. Cordless Phone Support Automotive & Communication Products Radio Scanners Two-Way Radios CB Radios Dashcams Radar Detectors Marine Radios Video Security M-F 8:30.
Connect a device with RS-232 to a computer with a USB 2.0 or 3.0 Type A port. OS Compatibility. Windows 10/8/7/Vista/XP//2000 (Windows 7,8,10 should auto detect and install the drivers) macOS 10.6 and above (Both computer and device must support macOS) Linux kernels 2.4.31 and later; Check the DB9 port on your device. PL-2303 Driver Installer.exe: Driver Installer for USB-1 cable: 1.6 Mb.
#12 I just received a AT-D868UV from Connect Systems with Firmware Ver: 2.32. They instructed me to pull down the v2.32 software package with the USB Virtual Com Port Driver and CPS program. I have a Dell XPS8900 with 16GB of RAM running Windows 10 Home v1803 that I only use for my radio gear -- Yaesu FT-DX3000, Kenwood TH-D74 HT, and a Bearcat BCD996XT scanner all which are using com ports with various programs. I ran the x64 version of USB Virtual Com Port Driver.exe using 'Run as administrator' and it completed successfully. Windows notified me that it was setting up Com Port 7 and it was successfully installed. But when I connected the D868 to the computer using the cable, the driver showed up in the Device Manager as GD32 Virtual Com Port (COM7) with a yellow triangle and an exclamation point. When I run the CPS (D868UVE v 1.32) in only sees com ports 3, 4 and 5 which are connected to my DX3000 and Bearcat scanner. And somehow it also compromised my TH-D74 com port when I plug it into my computer. The RT Systems software and the Kenwood MCP software cannot recognize the com port 8 for the D74 which was working prior to installing the AnyTone software! Does anyone have any experience with this who could help me out? I am not tech savvy enough to figure this stuff out. Any help would be greatly appreciated! KB4NC |
#13 I posted this on October 13th and not sure why it re-posted today. I resolved this issue from reading a post here in this group that I had to tell Windows 10 to DISABLE SIGNED DRIVER ENFORCEMENT. Once I did that, the driver installed correctly and I was able to use the CPS to communicate with the AT-D868UV. 73, Manny KB4NC |
#14 You need to restart your computer. toggle quoted messageShow quoted textCounty of Santa Cruz On Sat, Oct 27, 2018 at 6:39 AM Manny KB4NC <kb4nc.ham@..> wrote:
|
#22 Hello, I have also been experiencing the yellow exclamation point in Windows 10 Device Manager next to the entry for the COM port that maps to my AnyTone AT-D878UV. I downloaded the most recent driver packages from both BridgeCom and Powerwerx. In both cases, the experience is the same. I've found that if I disconnect/reconnect the radio several times, or plug the cable into the radio and computer while the radio is powered off, then turn the power on, the yellow exclamation doesn't appear _as frequently_ as it does when connecting with the power on. I'm running the Fall Creators Update of Windows 10 Enterprise edition. I've found that when using the same radio and the same version of the driver on another computer running Windows 7 SP1, the connection is made without the exclamation point. I have a funny feeling this is an issue specific to the Windows 10 Fall Creators update and nothing I'd love to know what the root cause of this issue! |
#23 If your Device manager shows another active USB Serial Device (COM3 here), uninstall it then choose the GD device port in your CPS. (The installed device will reinstall when you unplug the radio). -.- -.. .--. -. .-. On Fri, Jan 25, 2019 at 7:09 AM JeffH <jeff@..> wrote: Hello, |
#24 Yes – I’m using the GD32 VirtualCom driver as depicted in your screenshot. Zte card reader driver download. I even removed the device, ran the uninstall for the driver, rebooted and reinstalled the driver. Still having the same issue. From:AnytoneDMR@groups.io <AnytoneDMR@groups.io> On Behalf Of Gary Watson If your Device manager shows another active USB Serial Device (COM3 here), uninstall it then choose the GD device port in your CPS. (The installed device will reinstall when you unplug the radio). -.- -.. .--. -. .-. On Fri, Jan 25, 2019 at 7:09 AM JeffH <jeff@..> wrote:
|
#26 just try a reset not a reboot, windows will reload what it wants to on a reboot. , Please note: message attached From: 'JeffH' <jeff@..> To: AnytoneDMR@groups.io Subject: Re: [Anytone] Help installing USB driver for AT-D868UV on Windows 10 Date: Tue, 29 Jan 2019 18:16:27 -0500 ____________________________________________________________ Terry Bradshaw Enthralled in Controversy glancence-hality.com http://thirdpartyoffers.juno.com/TGL3131/5c50e7e9c62ba67e929e6st02duc |
If drivers don't install automatically with Windows there is a driver that can be manually installed below.
Memory Storage/Programming
Uniden America Usb Devices Driver Download
- 10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
- PC Programming - you can download information into the scanner and control the scanner via your personal computer.
- CTCSS and DCS Squelch Modes - rapid search for CTCSS/DCS tones/codes used during a transmission. You can identify up to 50 CTCSS tones and 104 DCS codes.
BC125AT Analog 500 Channel Handheld Scanner with Alpha Tagging
- 500 Alpha Tagged Channels
- Close Call Do Not Disturb Mode
- Civilian and Military Air bands
- Service Search
- Weather Alert
Memory Storage/Programming
- 10 Channel Storage Banks - You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
- PC Programming - you can download information into the scanner and control the scanner via your personal computer.
- CTCSS and DCS Squelch Modes - rapid search for CTCSS/DCS tones/codes used during a transmission. You can identify up to 50 CTCSS tones and 104 DCS codes.
- Direct Access - lets you directly access any channel.
- Text Tagging - you can name each channel, using up to 16 characters per name.
- Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.
- Key Confirmation Tones - You can turn on/off a tone that sounds when you perform an operation correctly or if you make an error.
- Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.
Close Call
- Close Call RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissions
- Close Call Do-Not-Disturb - checks for Close Call activity in between channel reception so active channels are not interrupted.
- Close Call Temporary Store - temporarily stores and scans the last 10 Close Call hits in the 'Close Call Hits' system.
Lock-Out Functions
- Lock-Out Function - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
- Temporary Lockout - makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.
Priority Functions
- Priority Scan with Do Not Disturb - lets you program one channel in each bank (10 in all) and then have the scanner check each channel every 2 seconds while it scans the banks so you don’t miss transmissions on those channels. Do-Not Disturb keeps the scanner from interrupting transmissions during receiving.
- Priority Plus Scan - you can set the scanner so it scans only the priority channels.
Display
- Display Backlight - You can turn on/off the LCD backlight, set it operate on squelch only, keypress only, or both.
- Signal Strength Meter - shows the signal strength for more powerful transmissions.
Antenna/Reception
- Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or, you can connect an external antenna for better reception.
- Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.
Service Banks/Searches
- Service Banks - frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS, and Racing banks to make it easy to locate specific types of calls and search any or all of these banks.
- Custom Search - lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
- Quick Search - allows you to enter a frequency and start searching up or down from that frequency.
- Turbo Search - increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.
- Search Lockouts - you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
- Scan/Search Delay/Resume - controls whether the scanner pauses at the end of the transmission to wait for a reply. You can set the Delay time for each Channel, Close Call Search, Custom Search, and Service search. You can also set a negative delay where the scanner stops on transmissions for a set time then automatically resumes.
Weather
Uniden America Usb Devices Drivers
- Weather Alert Priority - the scanner scans active WX channels every 5 seconds to check for the presence of a 1050 Hz Weather Alert Tone.
- Weather Alert Standby - the scanner allows you to monitor for weather alerts broadcast on NOAA channels.
Power
- Two Power Options - let you power the scanner using the included two AA rechargeable or alkaline batteries or the supplied USB cable.
- Battery Save - works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
- Battery Low Alert - the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets
- Built-In Charger - allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.
Uniden America USB Devices Driver
Frequency Coverage:
25-54 MHz
108-174 MHz
225-380 MHz
400-512 MHz